CTFE to Term-Attn  Cable Harness
                  ----------------------------------

                                              Original Rev.   8-JAN-2001
                                               Current Rev.  4-SEPT-2001



The CTFE Card cable harness consists of two separate cables.


1.  Molex 6 pin connector at each end
    length is  7 1/4" to 7 3/8" full length far end of one connector to
      the far end of the other connector
    3 twisted pairs of #26 stranded wire


2.  Molex 6 pin connector at one end, stripped tinned wires at the other
    longest leads are 16 1/2" long
    3 twisted pairs of #26 stranded wire that are twisted together


The 6 pin connectors on these cables mate with Molex part number 53048-0610
1.25mm headers on the Term-Attn circuit boards.




The same pinout and wire colors are used in both cables.

     Molex Connector         Wire
        Pin Number          Color
     ---------------      --------
             1              Green
             2              Black

             3             Yellow
             4              Black

             5                Red
             6              Black



Part Numbers of Components Used

    6 pin connector housings are Molex part number:  51021-0600

    6 pin connector contacts are Molex part number:  50079-8000

    all #26 stranded wire is Belden part number:     8505



Required number of cables

    The running system needs 320 of each of the 2 types of cables.
    I would like to make about 350 of each type.